Misc Menu Operations; Port Settings For Control From An External Device - Sony MVS-8000X User Manual

Wipe: The operation applies to wipes in the transition
control block.
Key Wipe: The operation applies to wipes in the
independent key transition control block.
3
Using any of the following methods, select the data to
be copied or swapped.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knobs to make the setting.
Knob Parameter Adjustment
1 Left No
2 Right No
a) Transition control block wipe data
b) Independent key transition control block wipe data
For details of the data affected, see "Copy and Swap"
(page 184).
4
To copy, press [Copy], and to swap, press [Swap].
To undo a copy or swap
Press [Undo], to return to the state before the copy or swap
was carried out.
Copy by Button Operation
You can copy key data by a simple button operation.
Basic button operation
The basic button operation is to hold down the copy source
button, then press the destination button.
You can undo the last operation using [Undo] in the menu
(see page 186).
Keyer copy button operation
Use the key delegation buttons in the respective banks.
To copy from M/E-1 key 1 to P/P downstream key
2
Hold down the M/E-1 key delegation button [KEY1] and
press the P/P key delegation button [DSK2].
186

Misc Menu Operations

Setting values
a)
Select data for 1 to 5
b)
copy/swap 1 to 40
source
a)
Select data for 1 to 5
b)
copy/swap 1 to 40
destination
Misc Menu Operations
In the Misc menu, you can carry out the following
operations.
• Enabling and disabling operation from an external
device, System Manager, or an editing keyboard.
• Enabling and disabling side flags on the background bus
of each of the M/E-1 and PGM/PST banks.
For the side flag function, see "Side Flags" (page 202).
• Switching the safe title function on or off for each
switcher output.
• Displaying the transition rate, independent key transition
rate, and fade-to-black transition rate for each of the M/
E and PGM/PST banks, and changing the settings.
Port Settings for Control From an
External Device
Enabling or disabling control from an
external device
1
In the menu control block, press the top menu
selection button [MISC], then select VF1 'Enable' and
HF1 'Port Enable.'
The Misc >Enable >Port Enable menu appears with
the status area showing the settings of the following
ports.
• Switcher Remote1 to Remote4 ports (RS-422A, D-
sub 9-pin)
• Switcher GPI port (parallel, 25-pin)
• DME1/DME2 Editor ports (RS-422A, D-sub 9-pin)
• DME1/DME2 GPI ports (parallel, 25-pin)
When the signal format is 1080P, you can also make
settings for DME3/DME4.
2
In the <Switcher> or <DME> group, press on the
name of the port for which you want to disable control
from an external device, turning it off.
To re-enable control for the port, press on its name
once more.
Notes
For the AUX bus operation from the Remote 1 to
Remote 4 ports of the switcher, the setting (Enable/
Disable/Manual) in the Setup menu takes precedence.
Only when the setting is "Manual," the settings made
in the Port Enable menu apply.
For details, see "Interfacing With External Devices
(Device Interface Menu)" in Chapter 19 (Volume 2).