Changing Dfa Configurations For 3Rd Party Finishers; To Enable A Different Profile Than The One Currently Enabled For A Finishing Configuration; To Change From Using Currently Installed Finishers And Enable A New Configuration - Xerox Nuvera User Manual

Changing DFA Configurations for 3rd Party Finishers

When your system is installed, a Xerox CSE uses the FreeFlow Print Server to create a configuration and
profile of the finishing devices on your system. A configuration represents the finishing module or
combination of finishing modules installed. Within a configuration are profiles that represent specific
destinations, device settings and attributes for that configuration.
To enable a different profile than the one currently enabled for a finishing
configuration:
1. On the Printer menu, select Finishing.
2. From the Finishers drop-down menu, select External Finishers.
The External Finisher window displays. One or more configurations will be listed depending on the
3rd party finishers installed.
3. If the job you are running requires a different finishing location than what is currently enabled for
that configuration, select the configuration identified as online.
4. Select a different destination profile listed under the configuration, right-click, and select Enable to
enable a different profile.

To change from using currently installed finishers and enable a new configuration:

This procedure is for instances when you need to physically change finishing devices and replace existing
finishers on the system with a different set of finishers. Refer to the vendor's 3rd party finishing
documentation to learn which finisher profiles will be changed automatically or which ones will need to
be manually updated.
1. On the Printer menu, select Finishing.
2. From the Finishers drop-down menu, select External Finishers.
The External Finishers window displays.
3. From the configuration list, select the configuration currently online.
4. To disable the profiles you do not want, right-click the profile(s), and select Disable. Disable all profiles
being used.
5. Remove existing finishing equipment and install the new equipment on the system as needed. Refer
to your 3rd party finishing documentation on how to manually adjust settings on the module itself.
6. On the External Finishers window, select a profile within the new configuration that you want to
enable and right-click. Or, you can also select the Catalog button and select predefined, Xerox supplied
configurations.
7. Select Enable for all profiles.
Previously enabled profiles will be disabled and placed offline. The new configuration is now online
and the selected profiles enabled.
8. Select Close.
Xerox ® Nuvera ®
User Guide and Training Aid (UGTA)
How Do I...
14-23