Checking The Swingarm; Checking Throttle Cable Routing - Husqvarna TX 125 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.39

Checking the swingarm

12.40

Checking throttle cable routing

Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specification.
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
S01340-01
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. (
–
Remove the right side cover. (
–
Remove the fuel tank.
Main work
(All 125/150 models)
–
Check throttle cable routing.
The throttle cable must be routed behind the handlebar, on the right of the
frame, and to the carburetor. The throttle cable must be secured behind the
fuel tank contact area rubber band.
» If the throttle cable routing is not as specified:
–
S01344-01
Info
Always change a damaged swingarm. Repair of the swingarm is
not authorized by Husqvarna Motorcycles.
p. 55)
p. 54)
p. 59)
( p. 60)
Correct throttle cable routing.
66