10
SERVICE SCHEDULE
○
One-time interval
●
Periodic interval
10.3
Recommended work
Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Grease the steering head bearing.
Check/adjust the carburetor components.
Service the fork.
Service the shock absorber.
Check the starter drive.
Change the piston and check the cylinder.
Change the piston and check the cylinder.
Perform minor engine service. (Check the exhaust control for functioning and smooth operation. Check the
clutch.)
Perform major engine service including removing and installing the engine. (Change the connecting rod,
conrod bearing, and crank pin. Check the transmission and shift mechanism. Change all engine bearings.)
○
One-time interval
●
Periodic interval
Every 80 operating hours/every 40 operating hours when used for motorsports
Every 40 operating hours/every 10 operating hours when used for motorsports
(
p. 68)
(
p. 51)
(All 150/250/300 models)
(TX 125 EU)
(All 150/250/300 models)
Once after 10 operating hours
36
Annually
●
●
●
●
●
●
○
●
●
●
●
●
●
●
●
●
●
●
●