17
TUNING THE ENGINE
17.1
Checking the play in the throttle cable
17.2
Adjusting the play in the throttle cable
Info
If the correct routing of the throttle cable has already been secured, the fuel tank does not need to be removed.
–
Check the throttle grip for smooth operation.
–
Turn the handlebar as far as possible to the right. Turn the throttle grip back and
forth slightly and determine the play in throttle cable
Play in throttle cable
»
If the throttle cable play does not meet the specified value:
–
Adjust the play in the throttle cable.
Danger
400192-11
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
–
–
–
Start the engine and let it run idle. Move the handlebar to and fro over the entire
steering range.
The idle speed must not change.
»
If the idle speed changes:
–
Adjust the play in the throttle cable.
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. (
–
Remove the right side cover. (
–
Remove the fuel tank.
–
Check throttle cable routing. (
Main work
–
Turn the handlebar as far as possible to the right.
–
Push back sleeve
–
Ensure that the throttle cable sleeve is pushed all the way into barrel adjuster
–
Loosen nut
E00429-10
–
Turn barrel adjuster
grip.
Guideline
Play in throttle cable
–
Tighten nut
–
Slide on sleeve
400192-11
Finishing work
–
Check the throttle grip for smooth operation.
–
Install the fuel tank.
–
Mount the seat. (
–
Install the air filter box cover. (
–
Install the right side cover. (
Always make sure there is sufficient ventilation when running the
engine.
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
p. 55)
p. 54)
p. 59)
(
p. 60)
p. 66)
.
.
so that there is play
.
.
(
p. 61)
p. 55)
p. 56)
p. 59)
.
3... 5 mm (0.12... 0.2 in)
(
p. 99)
(
p. 99)
in the throttle cable at the throttle
3... 5 mm (0.12... 0.2 in)
99
.