Removing The Right Side Cover; Installing The Right Side Cover - Husqvarna TX 125 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.29

Removing the right side cover

12.30

Installing the right side cover

Main work
–
Remove screws
–
Remove the glass fiber yarn filling
–
Clean the parts that need to be reinstalled and check for damage.
–
Fit the new glass fiber yarn filling
–
Slide outer tube
–
Mount and tighten all screws
Guideline
Screws on the main silencer
B00486-10
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
–
Remove screw
–
Pull off the side cover sideways in areas
front.
V00408-10
–
Position the side cover on collar bushings
–
Engage the side cover in areas
–
Mount and tighten screw
Guideline
Remaining screws, chassis
V00409-10
 . Pull out inner tube 

from the inner tube.

into the inner tube.

over the inner tube with the new glass fiber yarn filling.

.
p. 58)
p. 59)

.

 
and

.
.
M5 7 Nm (5.2 lbf ft)
and  , and remove toward the
 
and , and push toward the rear.
.
M5 5 Nm (3.7 lbf ft)
59