Checking The Brake Discs; Checking The Front Brake Fluid Level - Husqvarna TX 125 Owner's Manual

13 BRAKE SYSTEM
13.4

Checking the brake discs

Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized Husqvarna Motorcycles workshop will
be glad to help.)
13.5

Checking the front brake fluid level

Warning
Danger of accidents An insufficient brake fluid level will cause the brake system to fail.
If the brake fluid level drops below the specified marking or the specified value, the brake system is leaking or the brake
linings are worn down.
–
Check the brake system and do not continue riding until the problem is eliminated. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
Warning
Danger of accidents Old brake fluid reduces the braking effect.
–
Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule. (Your autho-
rized Husqvarna Motorcycles workshop will be glad to help.)
–
Check the thickness of the front and rear brake discs at multiple points on each
brake disc to ensure it is at least thickness
Info
A A
Wear reduces the thickness of the brake disc around the area used by the
brake linings.
Brake discs - wear limit
Front
400257-10
Rear
» If the brake disc thickness is less than the specified value:
–
Change the front brake disc.
–
Change the rear brake disc.
–
Check the front and rear brake discs for damage, cracking, and deformation.
» If the brake disc exhibits damage, cracking, or deformation:
–
Change the front brake disc.
–
Change the rear brake disc.
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Check the brake fluid level in the viewer
»
If the brake fluid level has dropped below marking
–
Add front brake fluid.
V00414-10

.
2.5 mm (0.098 in)
3.5 mm (0.138 in)

.

:
( p. 73)
72