Adjusting The Spring Preload Of The Fork - Husqvarna TX 125 Owner's Manual

11 TUNING THE CHASSIS
11.14

Adjusting the spring preload of the fork

Guideline
Rebound damping (All 125/150 models)
Comfort
Standard
Sport
Rebound damping (All 250/300 models)
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Turn the adjusting wings
The marking +0 aligns with the right wing on both fork legs.
Info
Make the adjustment by hand only. Do not use a tool.
Make the same adjustment on both fork legs.
–
Turn the adjusting wings clockwise.
Guideline
E00452-10
Spring preload - Preload Adjuster (All 125/150 models)
Comfort
Standard
Sport
Spring preload - Preload Adjuster (All 250/300 models)
Comfort
Standard
Sport
The adjusting wings engage noticeably at the numerical values.
Info
Adjust the spring preload to the numerical values only as the preload will
not engage between the numerical values.
Turn clockwise to increase the spring preload; turn counterclockwise to
reduce the spring preload.
Adjusting the spring preload has no influence on the absorption setting of
the rebound damping.
Basically, however, you should set the rebound damping higher with a
higher spring preload.
Finishing work
–
Remove the motorcycle from the lift stand. (
18 clicks
15 clicks
12 clicks
18 clicks
15 clicks
12 clicks
p. 45)

counterclockwise all the way.
+0
+0
+3
+0
+0
+3
p. 45)
43