Measuring The Rear Wheel Dimension Unloaded - Husqvarna TX 125 Owner's Manual

11 TUNING THE CHASSIS
11.6

Measuring the rear wheel dimension unloaded

–
Turn adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping (All 125/150 models)
Comfort
Standard
Sport
F00271-10
Rebound damping (All 250/300 models)
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Position the sag gauge in the rear axle and measure the distance to marking SAG
on the rear fender.
Sag gauge (00029090500)
Pin for sag gauge (00029990010)
–
Note down the value as dimension
402415-10
Finishing work
–
Remove the motorcycle from the lift stand. (

clockwise up to the last perceptible click.
17 clicks
15 clicks
13 clicks
17 clicks
15 clicks
13 clicks
p. 45)

.
p. 45)
39