Table of Contents
Advertisement
3 SPECIFICATIONS
3 - 48
(30) Slave Function Receive Data (addresses 0B00
2879)
The data received from the master node is stored. The data of the size that is set
by the "setting area of the number of slave function reception bytes" becomes
valid.
0B00
H
0B01
H
0B02
H
(31) Slave Function Transmit Data (addresses 0C00
3135)
The data to be transmitted to the master node is written by the TO instruction.
The I/O data of the size, which is set by the "setting area of the number of slave
function transmission bytes," is sent.
0C00
H
0C01
H
0C02
H
POINT
When the QJ71DN91 is used as the master node, set an even number of byte
modules. If an odd number of byte modules is set and word modules and double-
word modules are set at the same time, the word data and double-word data
cannot be sent and received normally.
2nd byte
1st byte
4th byte
3rd byte
5th byte
6th byte
2nd byte
1st byte
4th byte
3rd byte
5th byte
6th byte
MELSEC-Q
to 0B3F
/2816 to
H
H
to 0B3F
/3072 to
H
H
3 - 48
Advertisement
Table of Contents
