Mitsubishi QJ71DN91 User Manual page 48

Devicenet master-slave module programmable logic controller
Table of Contents

Advertisement

3 SPECIFICATIONS
Error code
Hexadecimal
Decimal
0000
to 0001
0 to 1
H
H
0002
2
H
0003
to 0007
3 to 7
H
H
0008
8
H
0009
9
H
000A
10
H
000B
11
H
000C
12
H
000D
13
H
000E
14
H
000F
15
H
0010
16
H
0011
17
H
0012
8
H
0013
19
H
0014
20
H
0015
21
H
0016
22
H
0017
23
H
0018
24
H
0019
25
H
001A
to 001E
26 to 30
H
H
001F
31
H
0020
32
H
0021
to 0027
33 to 39
H
H
0028
40
H
0029
41
H
002A
to 00CF
42 to 207
H
H
00D0
to 00FF
208 to 255
H
H
3 - 31
2) The DeviceNet general error code list is shown in Table 3.15.
Table 3.15 DeviceNet general error code list
Error name
Reserved
Resource unavailable
Reserved
Service not supported
Invalid attribute value
Reserved
Already in requested mode/state
Object state conflict
Reserved
Attribute not settable
Privilege violation
Device state conflict
Reply data too large
Reserved
Not enough data
Attribute not supported
Too much data
Object does not exist
Reserved
No stored attribute data
Store operation failure
Reserved
Vendor specific error
Invalid parameter
Future extensions
Invalid Member ID
Member not settable
Reserved
Reserved for Object Class and service errors
(c) Other message communication
Refer to the DeviceNet Specifications Manual (Release 2.0), Volumes 1 and
2, for other message communication.
Description
Reserved by DeviceNet
Requested service could not be executed because there was no space in
the required resource.
Reserved by DeviceNet
Requested service is not supported. Or, the requested service is not
defined by the specified object class/instance.
Requested service had an error in the attribute data.
Reserved by DeviceNet
Specified object has already made a transition to the requested
mode/status.
Specified object was not in the state that could execute the requested
service.
Reserved by DeviceNet
Requested setup service specified an unchangeable attribute.
Service requester did not have the access privilege.
Specified device was not in the state that could execute the requested
service.
Response data length exceeded the data length that can be processed.
Reserved by DeviceNet
Requested service did not provide sufficient data to execute processing.
Requested service specified undefined attribute.
Requested service also included invalid data.
Requested service specified unimplemented object.
Reserved by DeviceNet
Attribute data of this object had not been saved before this service was
requested.
Attribute data of this object was not saved due to an error that occurred
during the save operation.
Reserved by DeviceNet
Vender-specific error occurred. Specific error that occurred is indicated in
the "additional error code" area (0134
code can be used only when the error codes listed in this table and the
object class definitions do not apply to the corresponding error.
Requested service had an error in the parameter. This code can be used
only when the parameter satisfies neither the requirement by the
DeviceNet specification nor the requirement defined by application object
specifications.
Reserved by DeviceNet
Member ID of the requested service specified the unimplemented
class/instance/attribute.
Requested setup service specified an unchangeable member.
Reserved by DeviceNet
This error code range is used to indicate errors specific to the object
class. The code in this range can be used only when an error code listed
in this table does not correctly explain the error that occurred. Using the
"additional error code" area (0134
area (0133
) can be explained in detail.
H
MELSEC-Q
) of the error response. This error
H
), the "DeviceNet general error code"
H
3 - 31

Advertisement

Table of Contents
loading

Table of Contents