Table of Contents
Advertisement
6 UTILITY PACKAGE (GX Configurator-DN)
QCPU
Q25HCPU
MODE
RUN
ERR.
USER
BOOT
A
USB
RS-232
Figure 6.1 Correlation chart for data created with the utility package
6 - 7
<Flash ROM data>
(a)
The data set with flash ROM settings is called the flash ROM data, which
can be saved in a desired directory different from the GX Developer project.
(b)
Steps 4) and 5) shown in Figure 6.1 are performed as follows:
4)
This step can be executed from the Flash ROM Setting screen or
Monitor/Test screen.
"Flash ROM Setting screen"
"Monitor/Test screen"
5)
This step can be executed from the Monitor/Test screen of the utility.
"Monitor/Test screen"
<Text files>
(a)
Text files can be created by performing the initial setting, auto refresh
setting, or operation of Make text file on the Monitor/Test screen. The text
files can be utilized to create user documents.
(b)
The text files can be saved in a desired directory.
GX Developer/
GX Configurator-DN
Project
1)
A
2)
B
4)
5)
3)
File read / File save
File read / File save
Read from module / Write to module
Disk
Project
A
B
C
QJ71DN91
QJ71DN91
RUN
MS
NS
ERR.
NODE ADDRESS
A: Indicates intelligent function
5
X10
module parameter
5
B: Indicates flash ROM data.
X1
C: Indicates data saved by text file
8
M
B
O
D
E
QJ71DN91
MELSEC-Q
Personal
computer
6 - 7
Advertisement
Table of Contents
