Installing Reactors, Filters And Braking Resistors - Siemens sinamics G120 Operating Instructions Manual

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Installing reactors, filters and braking resistors

The following supplementary components may be required depending on the Power

Modules and the particular application:

● Line reactors

● Braking resistors

● Brake Relay

Installing these components is described in the documentation provided.

For frame sizes FSA, FSB and FSC, reactors, filters and braking resistors are available as

base components. You can also install base components next to Power Modules.

For modules of the frame sizes FSA, FSB and FSC, reactors, filters and braking resistors are

available as base components. An overview of the permitted base component combinations

is provided below. You can also install base components next to the Power Module.

Installing base components

Converter with CU250S-2 Control Unit

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

4.3 Installing reactors, filters and braking resistors