Description; Identifying The Converter - Siemens sinamics G120 Operating Instructions Manual

Description

Use for the intended purpose
The inverter described in this manual is a device to control a three-phase motor. The inverter
is designed for installation in electrical installations or machines.
It has been approved for industrial and commercial use on industrial networks. Additional
measures have to be taken when connected to public grids.
The technical specifications and information about connection conditions are indicated on
the rating plate and in the operating instructions.
3.1

Identifying the converter

Main components of the inverter
Each SINAMICS G120 inverter comprises a
Control Unit and Power Module.
• The Control Unit controls and monitors the
Power Module and the connected motor.
• The Power Modules are available for motors
with a power range of between 0.37 kW and
250 kW.
The following data is provided on the Power Module type plate (
● Designation:
● Technical data:
● Article number:
● Version:
The following data can be found on the Control Unit type plate (
● Designation:
● Article number:
● Version:
Converter with CU250S-2 Control Unit
Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE
e.g. Power Module 240
Voltage, current and power
e. g. 6SL3224-0BE13-7UA0
e.g. A02
e.g. CU250S-2 DP Control Unit
e.g. 6SL3246-0BA22-1PA0
e.g. 02 (hardware) 4.6 (firmware)
3
①
):
②
):
27