Siemens sinamics G120 Operating Instructions Manual page 392

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Corrective maintenance

8.2 Replacing an encoder

Changing the encoder data

To change the encoder data, proceed as follows:

1. From the navigation bar, open the screen form "Control_Unit/Configuration".

2. Select the "Configuration" tab.

3. Select the "Encoder data" button.

4. Change the encoder data.

You have changed the encoder data.

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Converter with CU250S-2 Control Unit