Siemens sinamics G120 Operating Instructions Manual page 353

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

7. Wait until STARTER signals that the data backup has been completed.

8. Close the screen forms.

You have backed up the settings of the inverter on the memory card.

Procedure with Startdrive

Proceed as follows to back up the inverter settings to a memory card:

1. Go online.

2. Select "Online & diagnostics".

3. Select "Backing up/reset".

4. Back up the settings to the EEPROM of the inverter.

5. Select the settings as shown in the diagram.

6. Start data transfer

7. Wait until Startdrive has signaled that the data backup has been completed.

You have backed up the inverter settings to a memory card.

Converter with CU250S-2 Control Unit

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Backing up data and series commissioning

7.1 Saving settings on a memory card