Siemens sinamics G120 Operating Instructions Manual page 376

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Corrective maintenance

8.1 Replacing inverter components

Special issue relating to communication via PROFINET: Device replacement without removable data

storage medium

The inverter supports the PROFINET functionality, replacing the device without data storage

medium. After replacing the Control Unit, the inverter is automatically assigned its device

name from the IO controller.

Independent of this, after replacing the inverter, you must transfer the settings of the old

inverter to the new inverter.

Details of the device replacement without removable storage medium can be found in the

PROFINET system description

(http://support.automation.siemens.com/WW/view/en/19292127).

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Converter with CU250S-2 Control Unit