Siemens sinamics G120 Operating Instructions Manual page 145

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Procedure with the BOP-2 operator panel

Proceed as follows to reset the inverter to factory settings:

1. In the "Options" menu, select the "DRVRESET" entry

2. Confirm the reset using the OK key.

3. Wait until the inverter has been reset to the factory setting.

You have reset the inverter to factory settings.

Converter with CU250S-2 Control Unit

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Commissioning

5.4 Restoring the factory setting