Loading Paper In The Cassettes - Kyocera TASKalfa 2550ci Operation Manual

Loading Paper in the Cassettes

The standard cassettes
The 2 standard cassettes will each hold plain paper, recycled paper or color paper.
Cassette 1 and 2 hold up to 500 sheets of plain paper (80 g/m
The following paper sizes are supported: A3, B4, A4, A4-R, B5, B5-R, A5-R, Ledger, Legal, Oficio II, Letter,
Letter-R, Statement-R, Folio, 8K, 16K, 16K-R and 216 × 340 mm.
IMPORTANT:
• When using media types other than plain paper (such as recycled or colored paper), always specify the
media type and paper weight settings. (Refer to Specifying Paper Size and Media Type for the
Cassettes on page 2-36, Media Type Setting on page 9-8.)
The cassettes can hold paper with weights between 60 and 256 g/m
between 106 and 256 g/m
• If the size of the paper being loaded is Oficio II, 8K, 16K,16K-R, or 216×340 mm, be sure to set the paper
size. (Refer to Specifying Paper Size and Media Type for the Cassettes on page 2-36, Media Type
Setting on page 9-8.)
• If you wish to use 330 × 210 mm to 356 × 220 mm paper, contact a service technician.
NOTE:
When using 11 × 17" (ledger) paper, lay the paper length guide down flat.
2
, set the media type to Thick and set the weight of the paper you are using.
1
2
2-29
2
) (or up to 550 sheets of 64 g/m
2
. If you are using a paper weight
Pull the cassette out toward you until it stops.
NOTE:
Do not pull out more than one cassette at a
time.
Squeeze the ends of the bottom of the paper length
guide and move the guide to fit the length of the
paper.
NOTE:
Paper sizes are marked on the cassette.
Preparation before Use
2
plain paper).
2