Sync Level Adjustment (For Ntsc Only); Y Level Adjustment (For Ntsc Only) - Panasonic AJ-D400P Service Manual

6-3. Sync Level Adjustment
(for NTSC only)
BOARD Video Main
SPEC.
A = 0.286 ± 0.004V
VIDEO OUT (75 W terminated)
TEST
ADJUST VR6 (Y)
INPUT CAMERA Colour Bar
MODE PLAY
M.EQ Waveform Monitor
Menu Setting
1. Open the operation panel.
2. Pressing [SHIFT], [+] and [-] buttons, set MENU
switch to SET position.
3. Set as follows:
PAGE : FUNCTION 3/5
REC SIGNAL
ECU CONNECT
PAGE : SERVICE ADJ.
IF ADJ.
1. Adjust the VR6 (Y) so that the level A is within
specification.
: CAM (NTSC only)
: EVR
: OFF
A
6-4. Y Level Adjustment
(for NTSC only)
BOARD Video Main
SPEC.
A = 1.00 ± 0.02V
VIDEO OUT (75 W terminated)
TEST
ADJUST EVR
INPUT CAMERA Colour Bar
MODE PLAY
M.EQ Waveform Monitor
Menu Setting
1. Open the operation panel.
2. Pressing [SHIFT], [+] and [-] buttons, set MENU
switch to SET position.
3. Set as follows:
PAGE : FUNCTION 3/5
REC SIGNAL
ECU CONNECT
PAGE : SERVICE ADJ.
IF ADJ.
EVR Setting
CMD : 02 ADR : 02
1. Press [®] or [¬] key in EVR so that the level A is
within specification.
: CAM (NTSC only)
: EVR
: OFF
A