S & T Brake Arm Unit Replacement - Panasonic AJ-D400P Service Manual

10-8-2. S & T Brake Arm Unit
Replacement
(Removal)
1. Remove the Cassette Cover and Remove the Left
Side Panel.
2. Remove the Cassete Up Unit.
3. Unscrew the screw (A) to remove the M-
Lock/Release Piece Unit.
4. Unscrew 4 screws (B) and remove the Supply
and Take up Brake Solenoid from Supply and
Take up Brake Solenoid Unit.
5. Lift up Supply and Take up Brake Arm Unit and
hang off spring at Brake Arm Unit side.
(Installation)
2. Install the new Brake Arm Unit according to the
opposite procedures to removing.
S BRAKE ARM U.
SCREW (A)
SCREW (B)
Fig. 10-6-1 Removal of M Cassette Brake Base Unit
S BRAKE ARM U.