Panasonic AJ-D400P Service Manual page 146

11-7. CCD17.0V Confirmation
BO ARD Po wer
SP EC. 17.4 0V+/-0.40V
T EST TP1005,TG1002[GND]
AD J UST - - - - - -
INPUT CAM ER A Col our Bar
M O DE
REC
M .EQ Digital Volt Meter
1. Connect a D.V.M. to TP1005, and its ground to
TG1002 on the POWER Board, then confirm that
the voltage is in the specification.
2. If it is not in the specification, adjust VR1002 (11-6
A3.6V Adjustment) so that the voltage is in the
specification.
11-8. CCD-11.0V Confirmation
BO ARD Po wer
SP EC. - 11.50 V+/-0.40V
T EST TP1006,TG1002[GND]
AD J UST - - - - - -
INPUT CAM ER A Col our Bar
M O DE REC
M .EQ Digital Volt Meter
1. Connect a D.V.M. to TP1006, and its ground to
TG1002 on the POWER Board, then confirm that
the voltage is in the specification.
2. If it is not in the specification, adjust VR1002 (11-6
A3.6V Adjustment) so that the voltage is in the
specification.
11-9. A-3.9V Confirmation
BO ARD Po wer
SP EC. -3.90 V+/-0.30V
T EST TP1012,TG1002[GND]
AD J UST - - - - - -
INPUT CAM ER A Col our Bar
M O DE REC
M .EQ Digital Volt Meter
1. Connect a D.V.M. to TP1012, and its ground to
TG1002 on the POWER Board, then confirm that
the voltage is in the specification.
2. If it is not in the specification, adjust VR1002 (11-6
A3.6V Adjustment) so that the voltage is in the
specification.
<MEMO>