Panasonic AJ-D400P Service Manual page 114

5-18. Rg g g g & Bg g g g Adjustment
BOARD CDS
CAM OUT(75 W terminated)
TEST
ADJUST VR101(R LVL), VR301(B LVL), EVR
F.NBR. (2000LUX)
CHART Grayscale Chart (3200°K)
Vector Scope, Lux Meter,
M.EQ
Color Pyrometer, EVR
1. Set the Vector Scope to Gain : MAX.
2. Set the EVR to [1E][27][00].
3. Select PRESET position in AWB mode.
4. Execute the ABB function.
5. Open the iris until the peak level is 100% in CAM
OUT without extender.
6. Confirm that the iris No. is F8 to F8-1/2.
7. When the dot is divided, adjust the Rg g g g and Bg g g g with
EVR according to the following procedure so that
the dots are joined.
8. Rg g g g : After inputting [0E][00][09] in EVR,
9. press the [®] or [¬] to adjust.
10. Bg g g g : After inputting [0E][00][0A] in EVR,
11. press the [®] or [¬] to adjust.
12. Confirm that the dot is at the center of the vector
scope. If not, adjust the VR101 (R LVL) and
VR301 (B LVL).
<Note>
1. Vertically divided
Horizontally divided : Adjust Bg g g g
: Adjust Rg g g g
(PAL)
l
R AD
(NTSC)
l
R AD
B AD
B AD