A/C Head Azimuth Adjustment - Panasonic AJ-D400P Service Manual

1-18. A/C Head Azimuth Adjustment

BOARD SERVO
SPEC CTL Output:C1,C2 = C1 max, C2 max
TEST POINT TP107:CTL
ADJUSTMENT SCREW F (A/C Head)
MODE PLAY
TAPE VFM3580KM, VFM3680KM
M.EQ Oscilloscope
TOOL VFK1148 (Hex Driver)
1. Observe the CTL output (TP107) on the
Servo Board.
2. To adjustment, loosen the screw (G) and
adjust screw (F) so that the CTL output
become maximum.
3. Tighten screw (G) with 1.0Kg torque.
< NOTE >
1. Adjust alternately
adjustments (Azimuth, Height).
with other A/C head