Using The Panasonic Au-Bp402 - Panasonic AJ-D400P Service Manual

Power Supply
Using the Panasonic AU-BP402 Battery Pack
1
Detach the battery mounts.
2
Connect the unit's connectors with the connectors of the AU-M402H battery case.
3
Mount the AU-M402H battery case.
Open the battery case cover and lift up the rubber cap to expose the screw holes. Tighten
the screws with a screwdriver and mount the case to the unit. Be sure to tighten the screws
completely.
Notes
Do not pull strongly on the rubber cap.
Take care not to catch the connection cord between the battery case and the main unit.
– 24 –