Panasonic AJ-D400P Service Manual page 472

LEVEL 1/6 Screen
This page performs the camera setup level 1 settings.
- L EVE L 1 / 6 -
C DT L COMPE . : OF F
¢
CHROMA DT L : 0 0
C DT L COR I NG : 0 0
KNEE APERTURE : ON
S L I M DT L : OF F
SUPER COLOUR : ON
CORNER DT L : OF F
U
It detects the chroma edge and places
on Y to boost the H detail. The higher
the number selected, the greater the
compensation.
LEVEL 2/6 Screen
This page performs the camera setup level 2 settings.
- L EVE L 2 / 6 -
SK I N TONE HUE
¢
SK I N TONE L EVE L
SK I N TONE W I DTH : 1 5
SK I N TONE COR I NG : 1 5
SK I N TONE Z EBRA : OF F
U This sets the range of the colours han-
dled as the skin tone on the basis of the
colours set by SKIN TONE HUE and
LEVEL. The higher the number select-
ed, the wider the skin tone range.
|Note{
Only numbers are displayed while the
variable range of any item except SKIN
TONE ZEBRA ON/OFF
changed.
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu: Setting the MENU switch to SET displays the USER menu.
ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays
the ENG menu.
Item
C DTL COMPE.
CHROMA DTL
C DTL CORING
KNEE
APERTURE
SLIM DTL
SUPER
COLOUR
CORNER DTL
Item
: 1 0 3
: 2 5
SKIN TONE HUE
SKIN TONE
LEVEL
SKIN TONE
WIDTH
SKIN TONE
CORING
SKIN TONE
ZEBRA
is being
Variable
VF
range display
ON ENG
OFF
0 . ENG
. .
15
0 . ENG
. .
15
ON ENG
OFF
ON ENG
OFF
ON ENG
OFF
ON ENG
OFF
Variable VF
range
display
103 ENG
. .
.
143
1 .
ENG
. .
25 .
. .
50
1 . ENG
. .
15 .
. .
30
0 . ENG
. .
15
ON ENG
OFF
107 (E)
Remarks
Chroma DTL ON/OFF switching
U
Chroma DTL setting
Chroma DTL CORING setting
Knee aperture ON/OFF switching
Detail above the knee point is boosted.
ON/OFF switching for mode which
narrows detail
ON/OFF switching for colour dynamic
range expansion
ON/OFF switching for mode which
increases edge resolution
Remarks
Skin tone hue setting
(This sets the phase of the skin tone
detection range.)
It changes the hue in the phase
direction.
Skin tone level setting
(This sets the intensity of the colours in
the skin tone detection range.)
It changes the level in the amplitude
direction.
Skin tone width setting U
Skin tone coring setting
This changes the amount of SKIN
TONE range detail.
Skin tone zebra ON/OFF switching
This sets ZEBRA in the SKIN TONE
range to ON or OFF.
This changes the coring in the range
across which ZEBRA can be seen.