Panasonic AJ-D400P Service Manual page 466

FUNCTION 3/5 Screen
This page performs the adjustment function 3 settings.
- FUNCT I O N 3 / 5 -
HUM I D OPE : OF F
¢
2 6 P CONTROL : OF F
REC S T ART : NORMA L
UB MODE : USER
PA S E T U I M E R : 3 0
BA T T ERY SE L : N i C d - 1 2
TCG V F D I SP : O F F
FEven if the BATTERY SEL is selected to NiCd-12, 13 or 14, the camera automatically senses whether or not an Anton Bauer's Intelligent
Battery is fitted. In the case of an intelligent battery, a numerical indication (percentage) of power available is displayed in the viewfinder. If the
camera is usually used with an intelligent battery, BATTERY SEL should be set to DIGITAL.
Variable
Item
range
HUMID OPE ON
OFF
26P CONTROL OFF
BOTH
ON
REC START ALL
NORMAL
UB MODE USER
REAL
EXT
PAUSE TIMER 10
20
30
BATTERY SEL NiCd-12
NiCd-13
NiCd-14
DIGITAL
TCG VF DISP ON
OFF
101 (E)
VF
Remarks
display
ENG VTR operation selection when
condensation occurs.
ON: Operation continues normally.
OFF: All operations prohibited except
for POWER switch and EJECT
button.
ENG 26P remote control selection
OFF: Unit only (26P control does
not function.)
BOTH: Unit and 26P remote control
(TALLY LED indicates unit
REC status.)
ON: 26P remote control only
(TALLY LED indicates 26P
VTR REC status.)
ENG REC acceptance selection for VTR
START/STOP
ALL: REC accepted regardless
of VTR mode.
NORMAL: REC accepted only during
STOP (POWER SAVE)
mode and REC PAUSE
mode.
ENG LTC UB usage method selection
USER: User setting (fixed value)
REAL: Real-time operation
according to the TIME DATE
time
EXT: When there is external TC
input, the UBG value is slave
locked. (When there is no
external input, the user
setting is used.)
ENG Selection for the recording/pause hold
time.
10: 10 minutes
20: 20 minutes
30: 30 minutes
ENG Battery type selectionF
NiCd-12: 12 V Nicad battery
NiCd-13: 13 V Nicad battery
NiCd-14: 14 V Nicad battery
DIGITAL: Digital battery
ENG Viewfinder time code display ON/OFF
ON: Time code is displayed.
OFF: Time code is not displayed.