Installation Safety Guidelines And Warnings; Acx1000 And Acx1100 Chassis Lifting Guidelines - Juniper acx1000 User Manual

CHAPTER 24
Installation Safety Guidelines and
Warnings

ACX1000 and ACX1100 Chassis Lifting Guidelines

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
ACX1000 and ACX1100 Chassis Lifting Guidelines on page 163
Installation Safety Warnings for Juniper Networks Devices on page 164
The weight of a fully configured chassis is about 7 lb (3.2 kg). Observe the following
guidelines for lifting and moving the router:
Before moving the router, read the guidelines in
and ACX1100 Routers" on page 45
power, environmental, and clearance requirements.
Before lifting or moving the router, disconnect all external cables.
To lift routing devices and components, use the following lifting guidelines:
Up to 39.7 lb (18 kg) one person lift.
39.7 lb (18 kg) to 70.5 lb (32 kg) two or more person lift.
70.5 lb (32 kg) to 121.2 lb (55 kg) three or more person lift.
Above 121.2 lb (55 kg) material handling systems (such as levers, slings, lifts and so
on) must be used. When this is not practical, specially trained persons or systems
must be used (riggers or movers).
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
General Site Guidelines for ACX Series Routers on page 46
Installing and Connecting an ACX1000 or ACX1100 Router Overview on page 97
"Site Preparation Checklist for ACX1000
to verify that the intended site meets the specified
163