Table 30: Supported Ethernet Standards - Juniper acx1000 User Manual

Table 30: Supported Ethernet Standards

Model Number
Ethernet 10BASE, Fast Ethernet 100BASE, and Gigabit Ethernet 1000BASE Specifications
SFP-1FE-FX
SFP-1GE-FE-E-T
SFP-1GE-LH
SFP-1GE-LX
SFP-1GE-SX
SFP-1GE-T
SFP-FE20KT13R15
Copyright © 2017, Juniper Networks, Inc.
NOTE: For XFP transceivers that can support either the 10-Gigabit Ethernet
or SONET OC192/STM64 specifications, check the standard supported for
the device into which the transceiver is installed. For example, the
XFP-10G-E-OC192-IR2 transceiver installed in a 10-Gigabit Ethernet PIC
supports the 10GBASE-E standard. However, the XFP-10G-E-OC192-IR2
transceiver installed in a SONET OC192/STM64 PIC supports the SONET
OC192/STM64 IR2 standard.
Table 27 on page 69 is organized by transmission speed and then alphabetically by model
number.
Transceiver
Type Connector
SFP LC
SFP RJ-45
SFP LC
SFP LC
SFP LC
SFP RJ-45
SFP LC
Chapter 10: Transceiver and Cable Specifications
Monitoring
Available Standard
No 100BASE-FX
No 10/100/1000
BASE-T
Yes 1000BASE-LH
Yes 1000BASE-LX
1000BASE-LX10
Yes 1000BASE-SX
No 1000BASE-T
No 100BASE-BX
Specifications
Fast Ethernet
100BASE-FX Optical
Interface Specifications
Ethernet 10BASE-T
Copper Interface
Specifications
Fast Ethernet
100BASE-T Copper
Interface Specifications
Gigabit Ethernet
1000BASE-T Copper
Interface Specifications
Gigabit Ethernet
1000BASE Optical
Interface Specifications
Gigabit Ethernet
1000BASE Optical
Interface Specifications
Gigabit Ethernet
1000BASE Optical
Interface Specifications
Gigabit Ethernet
1000BASE-T Copper
Interface Specifications
Fast Ethernet and
Gigabit Ethernet
Bidirectional SFP Optical
Interface Specifications
83