Updating The System (Modify Menu) - Denso BHT-604B User Manual

4.5.14

Updating the System (MODIFY MENU)

Use the following procedure to update the system.
1.
Press the dot key while holding down the SF key at the SYSTEM
MENU.
T he MODIFY MENU screen displays as shown on the right.
[1 : SYSTEM MODIFY]: Updates the BHT system.
[2 : CU-F/W MODIFY]:
R efer to the following section for details of the above items.
P ress the C key to return to the SYSTEM MENU.
[1] Updating the BHT system
Update the BHT system after downloading the BHT system update file.
(Refer t o section "4.2.1 Updating the BHT System" for details.)
1.
U se the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight
[1 : SYSTEM MODIFY] and then press the ENT key.
T he screen displays as shown on the right..
If the downloaded BHT update file name differs from this file name, specify
th e correct file name using the procedure on the following page.
[1: DO IT]:
Updates the BHT system.
[2: FILENAME]:
Displays the filename to be used for updating the BHT system
P ress the C key to return to the SYSTEM PARAMETER menu.
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight
[1: DO IT] and th
T he screen shown on the right displays and the BHT system is updated.
Up on comp tion of the update, the BHT power turns OFF automatically. le
Updates the CU-611 system.
en press the ENT key.
Barcode Handy Terminal
.
123