Furuno TZT9 Operator's Manual page 78

3. Select the compass box to set the STBY mode. The blue line disappears and the
indication for the steering modes ([Nav] and [Auto]) appears.
10:30 AM
8.9
8.9
36.1
36.1
72.81
72.81
Note: You can change the steering mode from AUTO to STBY with the pop-up
menu. Select the CTS line to display the pop-up menu then select [STBY].
How to activate NAV mode
The [Nav] icon in the data box is grayed out without an active point or route. To acti-
vate NAV mode, activate a point or route (see sections 4.10 and 5.8). The message
"Do you want to navigate using the NAVpilot?" appears on the screen (see the follow-
ing note). Select [Yes]. The steering mode automatically changes to NAV.
Note: You can turn on or off this message by the [Routes] - [Navigate with AutoPilot]
menu.
[ON]: When activating a point or route, the message appears.
[OFF]: When activating a point or route, the message does not appear.
1. Select [Nav] in the data box to activate NAV mode.
8.9 8.9
8.9
36.1 36.1
36.1
72.81 72.81
72.81
°M
( )
( )
2. CHART PLOTTER
0 0
1 1
2 2
3 3
4 4
2-23