Furuno TZT9 Operator's Manual page 77

2. CHART PLOTTER
STBY
NAV
8.9
8.9
36.1
36.1
72.81
2.88
2. Adjust the CTS line by the following two methods:
• Use the course adjustment buttons to adjust the CTS line. Tap the find adjust-
ment buttons for 1° increments; coarse adjustment buttons for 2°-30°* incre-
ments. * Preset with [AutoPilot Navdata Increment] in the [Routes] menu.
• Select the CTS line to display the pop-up menu then select [Adjust]. Drag the
circle icon to set the angle then select [Done] at the top right-hand corner of the
screen. (You can also drag the CTS line to set the angle.)
Select the
CTS line.
2-22
1
10:30 AM
Mode Auto (Adv)
COG °M
90
8.9
8.9
36.1
( )
36.1
72.81
72.81
301.2°M
Fine adj. button(1°)
Red: minus, Green: plus
Coarse adj. button
Red: minus, Green: plus
Adjust
STBY
Select
[Adjust].
2
Gray arrow: Heading
Blue arrow: Course to steer
Heading
(digital)
Set
course
Done
90 °
Drag the circle
icon to set the
angle.
3
Done