Furuno TZT9 Operator's Manual page 43

1. SYSTEM INTRODUCTION
2. Select the [General] - [Function Gesture] menu.
3. Select [MOB].
4. Select [Close] to exit the menu.
5. Tap the screen with two fingers on the chart plotter display or the radar display.
The area around the boat icon is zoomed in. (The scale is automatically set to 1.25
nm for the chart plotter and 0.5 nm for the radar.) The MOB mark is entered and
flashes. A yellow line runs between the MOB position and your ship. This line is
the course to take to go to the MOB position.
MOB mark on the chart plotter display
The MOB marks entered are automatically saved to the points lists.
Method 2: [MOB] icon on the menu icon bar
Select the [MOB] icon on the menu icon bar. The chart plotter display opens and the
MOB mark position is zoomed in.
MOB information
Select a MOB mark to display the name, comment and depth (chart plotter only).
1-28
Function Gesture
Event
None
Screen Capture
Event
MOB
Home
MOB mark on the radar display