How To Select A Display - Furuno TZT9 Operator's Manual

TZTBB: Drag the circle icon to adjust the brilliance of the
power indicator and the backlighting for the
liance level is indicated on the icon. You can also adjust them
with short press of the
1.5

How to Select a Display

Use the Home key (or icon) and the RotoKey
from the display selection window.
1. Press the Home key (or tap the Home icon) to show the display selection window.
This icon appears
only when fusion
equipment is
connected.
2. Do one of the following:
• TZT9/TZT14: Rotate the RotoKey
area at the bottom of the screen then push the key.
• TZT9/TZT14/TZTBB: Select (tap) the required display.
For details, see section 14.2.
key. The bril-
key repeatedly.
TM
TM
to put the required display in the monitor
1. SYSTEM INTRODUCTION
(or touch control) to select a display,
Power
indicator
Monitor
area
1-11