Navpilot-700 Series Auto Pilot; How To Show The Navpilot-700 Series Data In The Data Boxes; How To Change The Steering Mode - Furuno TZT9 Operator's Manual

2.12

NAVpilot-700 Series Auto Pilot

The FURUNO NAVpilot-700 Series Auto Pilot installs in the TZT network. The follow-
ing functions can be controlled from a TZT display:
• Displaying the NAVpilot-700 series data in the data boxes.
• Selecting of steering mode (AUTO or NAV).
Note: When an alarm message for the NAVpilot-700 series appears, check the control
unit of the NAVpilot-700 series.
2.12.1

How to show the NAVpilot-700 series data in the data boxes

For details, see section 1.12.
1. Select [DATA 1], [DATA 2] or [RADAR] of the side menu at the left or right of the
screen to show a data box set.
2. Select a data box. The pop-up menu appears.
3. Select [Select Data].
4. Select [NAVPilot]. The NAVpilot-700 series data are displayed in the data boxes.
NAVpilot-700
series data
2.12.2

How to change the steering mode

How to activate AUTO mode
1. Select [Auto] in the data box to activate AUTO mode. The followings occur:
1) Two icons for the direction appear; the blue icon is for the set course, the gray
for the heading.
2) The indication for the steering modes ([Nav] and [Auto]) turns to the digital in-
dication of the set course with the  and  marks.
3) The blue line for CTS (course to steer) appears.
Compass box
10:30 AM
8.9 8.9
8.9
36.1 36.1
( )
36.1
72.81
72.81
72.81
2. CHART PLOTTER
2-21