Target Analyzer - Furuno TZT9 Operator's Manual

Orientation mode (head-up or north-up)
Rain clutter
Range scale control
Range max. range scale
Range rings (show, hide)
RezBoost
Sea clutter
Clear Trail
* Cannot be adjusted when the Target Analyzer (radar sensor DRS4D-NXT) is active.
The no.1 screen is independent of the no.2 screen when the no.2 screen is in standby.
However, when the no.2 screen goes to transmit state, so does the no.1 screen.
6.25

Target Analyzer

The target analyzer paints radar echoes in the colors shown in the table below, to help
you distinguish approaching targets from all other radar echoes. Requires GPS posi-
tion data. Radar Adjust (Gain, Sea, Rain) and Auto Sea Mod cannot be adjusted when
the Target Analyzer is active.
Target analyzer is available with the DRS4D-NXT radar sensor.
Target type
Approaching target
Rain clutter
Targets other than mentioned above
Radar function
No.1 No.2 No.1
screen screen
screen
Two-way split
Target type and color painted by the target analyzer
Red
Blue ([Target Analyzer Mode] ([Radar] menu) set to [Rain].)
Green
Availability in dual range mode
Magnetron radar
Independent
Independent
Independent
36 NM
Independent
-
Independent
Independent
No.2
screen
No.1
screen
No.2
screen
Three-way split
Color
6. RADAR
Solid state radar
Independent
Interlocked
Independent
12 NM
Independent
Independent
Interlocked
Independent
No.1
screen
No.2
screen
6-19