1.20
AIS Transponder FA-30, FA-50
The FURUNO AIS Transponder FA-30 (or FA-50) installs in the TZT network and can
be controlled from a TZT display. To access the main menu of the transponder, do the
following:
1. At the installation of this equipment, connect the FA-30 (or FA-50) to the TZT.
2. Select [Menu] on the menu icon bar to open the main menu.
3. Select the [Initial Setup] - [FA30 Browser] or [FA50 Browser] menu.
4. Refer to the Operator's Manual for FA-30 or FA-50 for operation information.
Browser Installation
FAX30 Browser
FA30 Browser
FA50 Browser
FA-30
FA-50
1. SYSTEM INTRODUCTION
Browser
Browser
Browser
Port Setup
Own Vessel Data
Sensor Status
Test
For Service
or
Initial Setup
Own Vessel Data
Message
Alarm Status
Sensor Status
Tests
For Service
Close
Close
1-31