Furuno TZT9 Operator's Manual page 209

10. CAMERA/VIDEO/FUSION-Link
FLIR camera
Images from an infrared camera allow you to navigate easily at night or in bad weath-
er. Select [Camera] - [FLIR Installation] of the main menu.
[Scan IP]: Select the [Scan] icon to scan the IP address automatically when connect-
ing the FLIR camera.
[FLIR IP]: Enter the IP address manually with the software keyboard then select [Con-
firm].
[Video Source]: Select the input source for the FLIR.
[PTZ Control]: Select [ON] to activate control of the PTZ (Pan/Tilt/Zoom) functions.
When activated, [Automatic Zoom], [Zoom Distance], [Camera Altitude], [Automatic
Lock On Active Waypoint] and [Automatic Lock ON MOB] are operative in this menu.
[Camera Offset (Right-left)]: Adjust the side position of the FLIR camera.
[Camera Offset (Up-Down)]: Adjust the up-and down position of the FLIR camera.
[Automatic Zoom]: Select the [ON] icon to turn on the automatic zoom.
[Zoom Distance]: Set the distance to zoom automatically.
[Camera Altitude]: Set the altitude for the FLIR camera.
[Automatic Lock On Active Waypoint]: Select the [ON] icon to automatically track the
point currently set as a go to point.
[Automatic Lock ON MOB]: Select the [ON] icon to automatically track the MOB posi-
tion.
10-4
FLIR Installation
Scan IP
FLIR IP
Video Source
PTZ Control
Camera Offset (Right-left)
Camera Offset (Up-Down)
Automatic Zoom
Zoom Distance
Camera Altitude
Automatic Lock On Active Waypoint
Automatic Lock On MOB
Scan
255.255.255.255
NickName Camera 1
+0.0 º
+0.0 º
300 ft
300 ft