Upgrading Legato 100 Series Software - KD Scientific KDS LEGATO 100 User Manual

Upgrading Legato 100 Series Software

✐
NOTE: Prior to upgrading, users will need
to install the KDS Legato 100 Series USB
driver as well as the bootloader driver file
(KDS Legato 100 Series-Bootloader.inf).
Reference "USB Virtual Comport Driver
Installation".
1. Upload the latest software version to your desktop (format is filename.srec).
2. Disconnect all I/O devices and then connect the pump to PC using a USB cable.
3. On the Set up screen of the pump, press the Upgrade Software button twice to enter "Boot Loader
Mode".
✐
NOTE: To exit boot loader mode without
upgrading the software, power cycle the
pump.
4. From the CD provided with the pump, open the Legato 100 Series Pump Updater Application.
5. Click Open Update File and browse to the file previously saved on your desktop and click Open.
6. Click Start Update.
7. After the update is complete, press Reboot to power cycle the pump.
508.429.6809
phone
info@kdscientific.com
e-mail
508.893.0160
fax
www.kdscientific.com
web
Appendices
KD Scientific Legato 100 Series Syringe Pump User's Manual
Publication 5617-006-REV-2.0
68