Table of Contents
Advertisement
Previewing the Configuration
It is simple to view the Pump Configuration on the
RUN display.
Press
to view Pump Configuration
After you have verified the configuration.
Press
to run the displayed configuration.
Configuring the Pump's
General Parameters
The pump has basic parameters that should be
configured during initial start-up. Once these parameters
are entered they probably won't be changed.
To enter the set-up screen press
508.429.6809
phone
info@kdscientific.com
e-mail
Configuring the KDS Legato 100 Series
508.893.0160
fax
www.kdscientific.com
web
Press to preview
configuration
KD Scientific Legato 100 Series Syringe Pump User's Manual
Publication 5617-006-REV-2.0
20
Advertisement
Table of Contents
