Appending A Program; Deleting A Program - KD Scientific KDS LEGATO 100 User Manual

Appending A Program

Follow these instructions to Append a previously created
Program into a new Program:
1. From the Program Configuration screen,
choose the Program Name button to enter the
Mode Selection screen.
2. From the list of available Programs, select
(press once) the Program you want as the
base Program.
3. Choose the File Options
Options screen.
4. Choose Append to access the Program to
Append screen.
5. Choose (press twice) the Program you would like
to Append (attach) to your base Program. The
pump will return you to the File Options screen and
display a confirmation that the Program
was copied.
6. Choose to return to the Mode
'BACK'
Selection screen.
508.429.6809
phone
info@kdscientific.com
e-mail
Operating the KDS Legato 100 Series

Deleting A Program

Follow these instructions to delete a previously
saved Program:
1. From the Program Configuration screen, choose
2. From the list of available Programs, select (press
button to enter the File
3. Choose
4. Choose
508.893.0160
fax
www.kdscientific.com
web
the Program Name button to enter the Mode
Selection screen.
once) the Program you want to delete, then choose
the File Options button to enter the File
Options screen.
Delete Program. The application will
display a warning message in the Message Area
asking you to confirm your deletion request.
Delete Program again to confirm the
deletion and return to the Mode Selection
screen.
KD Scientific Legato 100 Series Syringe Pump User's Manual
47
Publication 5617-006-REV-2.0