Time Commands - KD Scientific KDS LEGATO 100 User Manual

SVOLUME
Sets or displays syringe volume. Configuration Run
screen mode only.
Command format:
svolume
Query response:
<lf>[##:]#.####ul<cr>
<lf>[##]<prompt>
or:
<lf>[##:]#.#### ml<cr>
<lf>[##]<prompt>
TVOLUME
Sets or displays the target volume. Configuration Run
screen mode only.
Command format:
tvolume [{target volume} {volume units}]
Query response:
<lf>[##:]Target volume not set<cr>
<lf>[##]<prompt>
or:
<lf>[##:] # xl<cr>
<lf>[##]<prompt>
WVOLUME
Displays the withdrawn volume. Configuration Run
screen mode only.
Command format:
wvolume
Query response:
<lf>[##:]# xl<cr>
<lf>[##]<prompt>

Time commands

CITIME
Clears the infused time. Configuration Run screen mode
only.
Command format:
citime
CTIME
Clears both the infused and withdrawn times.
Configuration Run screen mode only.
Command format:
ctime
508.429.6809
phone
info@kdscientific.com
e-mail
Operating the KDS Legato 100 Series
CTTIME
Clears the target time. Configuration Run screen mode
only.
Command format:
cttime
CWTIME
Clears the withdrawn time. Configuration Run screen
mode only.
Command format:
cwtime
ITIME
Displays the infused time. Configuration Run screen mode
only.
Command format:
itime
Query response:
<lf>[##:]# seconds<cr>
<lf>[##]<prompt>
or:
<lf>[##:]##:##:##<cr>
<lf>[##]<prompt>
TTIME
Sets or displays the target time. Configuration Run screen
mode only.
Command format:
ttime [{target time}]
Query response:
<lf>[##:]Target time not set<cr>
<lf>[##]<prompt>
or:
<lf>[##:]# seconds<cr>
<lf>[##]<prompt>
or:
<lf>[##:]##:##:##<cr>
<lf>[##]<prompt>
WTIME
Displays the withdrawn time. Configuration Run screen
mode only.
Command format:
wtime
Query response:
<lf>[##:]# seconds<cr>
<lf>[##]<prompt>
or:
<lf>[##:]##:##:##<cr>
<lf>[##]<prompt>
508.893.0160
fax
www.kdscientific.com
web
KD Scientific Legato 100 Series Syringe Pump User's Manual
Publication 5617-006-REV-2.0
56