System Commands - KD Scientific KDS LEGATO 100 User Manual

Argument errors
Argument errors are displayed when a command argument
is unrecognized or out of range. The argument in question
will be displayed except in the case of missing arguments.
The argument error has the following format:
<lf>[##:]Argument error: [bad argument]<cr>
<lf>[##:]<sp><sp><sp>{error message}<cr>
<lf>[##]<prompt>

System commands

ADDRESS
Sets or displays the pump address. Valid range is 0 to 99.
Command format:
address [0-99]
Query response:
<lf>[##:]Pump address is #<cr>
<lf>[##]<prompt>
✐
NOTE: Pumps with an address of 0 are
masters, and pumps with an address
between 1 and 99 are slaves.
CATALOG
Displays a catalog of programs stored in the pump.
Command format:
cat
Query response:
<lf>[##:]Program name Size<cr>
<lf>[##:]———————- ——<cr>
<lf>[##:]{program name}
This line is repeated for each file on the disk
<lf><lf>[##:]# file(s) using # steps<cr>
<lf>[##]<prompt>
✐
NOTE: The file size is the number of steps in
the program plus one for the file information
header.
The last line shows the number of files and the total number
of steps being used on the disk.
508.429.6809
phone
info@kdscientific.com
e-mail
Operating the KDS Legato 100 Series
CONFIG
Sets or displays pump configuration.
Command format:
Config [{config designation}|{value}]
✐
DELMETHOD
Deletes a program, stored in the pump.
Command format:
delmethod {program}
DIM
Sets or displays the brightness level in percent. Valid range
is 0 to 100. Note that specifying 0 will turn the backlight
off so that the screen will not be visible.
Command format:
dim [0-100]
Query response:
<lf>[##:] #%<cr>
<lf>[##]<prompt>
ECHO
Sets or displays the USB echo state. Valid states are on
or off.
Command format:
echo [on|off]
Query response:
<lf>[##:] OFF<cr>
<lf>[##]<prompt>
or:
<lf>[##:] ON<cr>
#<cr>
<lf>[##]<prompt>
FORCE
Sets or displays the infusion force level in percent. Valid
range is 1 to 100.
Command format:
force [1-100]
Query response:
<lf>[##:]#%<cr>
<lf>[##]<prompt>
508.893.0160
fax
www.kdscientific.com
web
NOTE: After changing the configuration, the
pump must be power cycled.
KD Scientific Legato 100 Series Syringe Pump User's Manual
Publication 5617-006-REV-2.0
52