Modifying An Existing/User-Defined Program; Changing The Order Of Steps In A Program; Deleting A Step From A Program; Defining Program Step Parameters - KD Scientific KDS LEGATO 100 User Manual

Modifying an Existing User-Defined Program
Once you have created a Program or have reviewed
an Existing Program, you may have a need to modify
the structure of the Program (i.e. the types of Steps and
Commands included, not just changes in the operating
parameters for a specific Step. The following procedures
will help you to efficiently modify a stored Program.

CHANGING THE ORDER OF STEPS IN A PROGRAM

1. From the Program Configuration screen,
choose the Step Definition button to enter the
Program Steps Summary screen.
2. Highlight (select with a single touch) the Step for
which you want to change the order.
3. Choose the Move Step Up or Move Step Down
button, as required, to move the Step into the
position that you want it executed.
508.429.6809
phone
info@kdscientific.com
e-mail
Operating the KDS Legato 100 Series

DELETING A STEP FROM A PROGRAM

1. From the Program Configuration screen, choose
2. Highlight (select with a single touch) the Step that
3. Choose the Delete Step button. The application
4. To confirm the deletion, choose the Delete Step

Defining Program Step Parameters

This section of the User Guide describes each of the
available functions available for use in KDS Legato
100 Series Existing and User-Defined Programs. The
information in this section is designed to help you set
the individual parameter values in each of the Program
Step options and to properly use the Advanced Options
commands.
The information that follows is organized into two sections:
• Pump Operation Profiles
• Advanced Options (Commands and I/O)
508.893.0160
fax
www.kdscientific.com
web
the Step Definition button to enter the Program
Steps Summary screen.
you want to delete.
will display a warning message in the Message
Area asking you to confirm your deletion request.
Delete Program Step showing confirmation message
on the screen
button again. The Step is removed and you are
returned to the Program Steps Summary screen.
KD Scientific Legato 100 Series Syringe Pump User's Manual
37
Publication 5617-006-REV-2.0