Volume Commands - KD Scientific KDS LEGATO 100 User Manual

IRAMP
Sets or displays the infusion rates while ramping.
Configuration Run screen mode only.
Command format:
iramp [{start rate} {start units} {end rate} {end units}
{ramp time in seconds}]
Query response:
<lf>[##:]Ramp not set up.<cr>
<lf>[##]<prompt>
or:
<lf>[##:]# xl/xxx to xl/xxx in # seconds<cr>
<lf>[##]<prompt>
✐
NOTE: To clear a ramp, use CTTIME
command.
IRATE
Sets or displays the infusion rate. Configuration Run
screen mode only. The rate argument may be replaced
by "max" or "min" to set the maximum or minimum rate,
respectively. "lim" may be used to display the range
limits.
Command format:
irate [max|min|lim|{rate} {rate units}]
Query response:
<lf>[##:]# xl/xxx<cr>
<lf>[##]<prompt>
or:
<lf>[##:]# xl/xxx to # xl/xxx<cr>
<lf>[##]<prompt>
WRAMP
Sets or displays the withdraw rates while ramping.
Configuration Run screen mode only.
Command format:
wramp [{start rate} {end rate} {rate units}
{ramp time in seconds}]
Query response:
<lf>[##:]Ramp not set up.<cr>
<lf>[##]<prompt>
or:
<lf>[##:]# xl/xxx to xl/xxx in # seconds<cr>
<lf>[##]<prompt>
508.429.6809
phone
info@kdscientific.com
e-mail
Operating the KDS Legato 100 Series
WRATE
Sets or displays the withdraw rate. Configuration
Run screen mode only. The rate argument may be
replaced by "max" or "min" to set the maximum or
minimum rate, respectively. "lim" may be used to
display the range limits.
Command format:
wrate [max|min|lim|{rate} {rate units}]
Query response:
<lf>[##:]# xl/xxx<cr>
<lf>[##]<prompt>
or:
<lf>[##:]# xl/xxx to # xl/xxx<cr>
<lf>[##]<prompt>

Volume commands

CIVOLUME
Clears the infused volume. Configuration Run screen
mode only.
Command format:
civolume
CTVOLUME
Clears the target volume. Configuration Run screen
mode only.
Command format:
ctvolume
CVOLUME
Clears both the infused and withdrawn volumes.
Configuration Run screen mode only.
Command format:
cvolume
CWVOLUME
Clears the withdrawn volume. Configuration Run
screen mode only.
Command format:
cwvolume
IVOLUME
Displays the infused volume. Configuration Run screen
mode only.
Command format:
ivolume
Query response:
<lf>[##:]# xl<cr>
<lf>[##]<prompt>
508.893.0160
fax
www.kdscientific.com
web
KD Scientific Legato 100 Series Syringe Pump User's Manual
Publication 5617-006-REV-2.0
55