Utilizing Usb Interface - KD Scientific KDS LEGATO 100 User Manual

Utilizing the USB Interface
Mating Face
USB VIRTUAL COMMPORT DRIVER INSTALLATION
When you connect the KDS Legato 100 Series pump
to a computer via USB for the first time, Windows will
seek to install a driver for communication. The following
section details the installation of the Virtual CommPort
Driver supplied with the KDS Legato 100 Series Pump.
508.429.6809
phone
info@kdscientific.com
e-mail
1. Connect the pump to the computer via USB.
2. Two Flash Update Applications will be
508.893.0160
fax
www.kdscientific.com
web
Pin # Signal
1 +5V
2 - Data
3 + Data
4 GND
Open the control panel and select System
and Security and then System. Click Device
Manager on the left hand menu.
displayed in the device manager, under Other
Devices. Right click on either of the flash
update applications and select Update Driver
Software.
KD Scientific Legato 100 Series Syringe Pump User's Manual
Appendices
64
Publication 5617-006-REV-2.0