Table of Contents
Advertisement
MANAGING LEGATO 100 SERIES
PROGRAMS
All Existing and User-Defined Programs are stored in
the Program List for ongoing use. Over time, you may
want to manage previously created Programs to keep
your Program List easy to navigate. In addition, the KDS
Legato 110, 111 and 180 pumps allows you to export
Program information to an externally connected pump
or to a computer that will be used to control operation.
This section of the Guide describes the file management
facilities available on the KDS Legato 110, 111 and 180.
✐
NOTE: The program management
procedures outlined in this section are not
available for non-programmable programs.
✐
NOTE: The program management
procedures outlined in this section are not
available for basic pump models (Infuse
Only, Withdraw/Infuse, etc.).
Saving A Copy Of A Program
Follow these instructions to save a copy of a Program
under a new name:
1. From Program Configuration screen, choose the
Program Name button to enter the Mode Selection
screen.
2. From the list of available Programs, select
(press once) the Program you want to save a copy
of, then choose the File Options button to enter the
File Options screen.
3. Choose
Save As/Copy
to access the Program
Name Entry screen. The current Program Name
will be displayed in the text entry box.
4. On the Program Name screen, type the new name
for your Program using the onscreen keyboard.
Choose the Symbols/Numbers button
display the list of available numbers and symbols
that can be included in the Program Name. To
switch the keyboard back to letters mode, choose
'ABC'
the Letters button
maximum]
5. When finished entering the new Program Name,
choose Accept to save your changes and return to
the File Options screen.
6. Choose
'BACK'
to return to the Mode
Selection screen.
508.429.6809
phone
info@kdscientific.com
e-mail
Operating the KDS Legato 100 Series
Renaming A Program
Follow these instructions to rename a previously saved
Program:
1. From the Program Configuration screen, choose
2. From the list of available Programs, select
3. Choose
4. On the Program Name screen, type the new name
5. When finished entering the new Program Name,
6. Choose
'.?123'
to
. [15 characters
508.893.0160
fax
www.kdscientific.com
web
the Program Name button to enter the Program
Mode screen.
(press once) the Program you want to rename, then
choose the File Options button to enter the File
Options screen.
Rename Program
to access the Program
Name Entry screen. The current Program Name
will be displayed in the text entry box.
for your Program using the onscreen keyboard.
Choose the Symbols/Numbers button
display the list of available numbers and symbols
that can be included in the Program Name. To
switch the keyboard back to letters mode, choose
the Letters button
. [15 characters
'ABC'
maximum]
choose Accept to save your changes and return to
the File Options screen.
'BACK'
to return to the Program
Selection screen.
KD Scientific Legato 100 Series Syringe Pump User's Manual
46
'.?123'
to
Publication 5617-006-REV-2.0
Advertisement
Table of Contents
