Setting The Display Brightness - KD Scientific KDS LEGATO 100 User Manual

Setting Display Brightness
The backlight can be adjusted.
In the Set-up screen, select
Press to select % Display Brightness
Select the % Display Brightness. For example, if
you select 80%, the brightness of the display will
be 80% of the maximum.
Accept the changes made by pressing
and go back to the Set-up screen.
Cancel the changes made by pressing
and go back to the Set-up screen.
For a Custom Value
Use this selection if the % is not listed.
Press Other Value to enter a custom %
Enter the percentage.
Accept the changes made by pressing
and go back to the Set-up screen.
Cancel the changes made by pressing
and go back to the Set-up screen.
508.429.6809
phone
info@kdscientific.com
e-mail
Configuring the KDS Legato 100 Series
Display Brightness
508.893.0160
fax
www.kdscientific.com
web
Press Here
Press here for custom
display brightness level
KD Scientific Legato 100 Series Syringe Pump User's Manual
25
Publication 5617-006-REV-2.0