Stop - KD Scientific KDS LEGATO 100 User Manual

Stop

The Stop Command is used to instruct the pump to stop
operation. This Command can be used in conjunction
with I/O Events to control pump operation based on
external events.
TO INSERT A STOP COMMAND IN A PROGRAM:
1. From the Program Main screen, choose
Step Definition to enter the Step Definition screen.
2. Highlight (select once) the Program Step that you
want the Stop Command to follow.
3. Choose the button to access the
'INS STEP'
Program Steps Menu screen.
4. Choose Advanced Options to enter the Set
Advanced Options screen.
5. Choose Stop to insert the Stop Command into
the Program.
508.429.6809
phone
info@kdscientific.com
e-mail
Operating the KDS Legato 100 Series
508.893.0160
fax
www.kdscientific.com
web
KD Scientific Legato 100 Series Syringe Pump User's Manual
Publication 5617-006-REV-2.0
42