Target Volume/Time Selection - KD Scientific KDS LEGATO 100 User Manual

Target Volume/Time Selection

1. In the Configuration Display
volume or time. In this example we want a
volume of 5 ml.
✐
NOTE: Target time is only allowed in
infusion only or withdrawal only modes.
2. Depending on the Mode either Target Volume
(I/W or W/I) will appear or Target Volume or
Target Time Selection (I only or W only).
✐
NOTE: For time enter h:m:s. or press
again to select secs. Time is accurate to
+/- 0.01secs. Remember to enter the :
3. To change the units, press the units.
4. In the Units Selection Display
volume units.
508.429.6809
phone
info@kdscientific.com
e-mail
Configuring the KDS Legato 100 Series
enter the target
Press to select target volume
Press to select target time
Press to select the
maximum volume
for the syringe
size selected
select the
508.893.0160
fax
www.kdscientific.com
web
Press Here
Press to change the units
KD Scientific Legato 100 Series Syringe Pump User's Manual
19
Publication 5617-006-REV-2.0